Pelco Camera Accessories CM1750 User Manual

CA1750 Mount Adapter  
Installation Instructions  
C209M (4/98)  
®
1.0 DESCRIPTION  
The CA1750 Mount Adapter is used when installing a bottom-mount camera on a  
BS1750, CM1750, CM1750S, orTB1750 mount only when the mount is attached to  
a ceiling. Use of the adapter, in this situation, will allow the camera to be mounted in  
its correct orientation, rather than being inverted.  
2.0 INSTALLATION  
To install the adapter (refer to Figure 1):  
1. Place the camera inside the adapter and align the camera mount boss with  
the elongated hole in the adapter.  
CAUTION: Be careful  
not to damage the cam-  
era by screwing the  
adapter too far onto the  
threaded stud. As soon as  
the stud threads appear  
through the adapter cap-  
tive nut, tighten the  
knurled nut.  
2. Attach the camera to the adapter with the provided 1/4-20 bolt and washers.  
3. Attach the adapter with camera to the 1/4-20 threaded stud on the installed  
mount swivel head.Tighten the knurled nut on the mount against the adapter.  
Figure 1. CA1750 Mount Adapter  
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108  
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 • DataFAX (1-559) 292-0435  
 

Peavey Home Theater System 35XO User Manual
Peavey Musical Instrument Amplifier KB2 KB3 User Manual
Peavey Music Mixer X VCA User Manual
Philips MP3 Docking Station DPC850 User Manual
Philips MP3 Player TDA9605H User Manual
Philips Portable DVD Player DCP851 User Manual
Philips Water Dispenser WP3810 User Manual
Planet Technology Switch POE 152S 12V User Manual
Porter Cable Telephone SOPHO IPC 100 User Manual
PYLE Audio Microphone PDMW100 User Manual