Pelco Recording Equipment RMA121SU User Manual

®
RMA131SU  
Rack Mount Kit  
Installation/Operation Manual  
C917M (5/96)  
1.0 WARNINGS  
2.0 SCOPE  
Prior to installation and use of this product, the follow-  
ing WARNINGS should be observed.  
The information within this manual covers the installa-  
tion of the RMA131SU Rack Mount Kit.  
1. Installation and servicing should only be done by  
Qualified Service Personnel and conform to all  
Local codes.  
Installation should be in accordance with all applicable  
local and national electric codes, utilizing approved ma-  
terials only.  
2. Unless the unit is specifically marked as a NEMA  
Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is de-  
signed for indoor use only and it must not be in-  
stalled where exposed to rain and moisture.  
Please thoroughly familiarize yourself with the infor-  
mation in this manual prior to installation and opera-  
tion.  
3.0 DESCRIPTION  
3. Only use replacement parts recommended by  
Pelco.  
The RMA131SU Rack Mount Kit is designed to pro-  
vide rack mounting for a single JVC TM-131SU 13"  
monitor.  
This versatile rack will fit any standard 19 inch wide  
console or rack configuration.  
PELCO • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-1981  
FAX (800) 289-9150 or (1-559) 292-3827  
 
6.0 RMA131SU EXPLODED ASSEMBLY DIAGRAM  
Figure 2. RMA131SU Rack Kit Assembly  
6.1 RMA131SU EXPLODED DIAGRAM PARTS LIST  
Item #  
Qty  
Description  
Part Number  
1
2
3
1
1
1
Base, Rack mount  
Side, Left rack mount  
Side, Right rack mount  
RMA131SU4000COMP  
RMA131SU4001COMP  
RMA131SU4002COMP  
Pelco Manual C917M (5/96)  
3
 
7.0 WARRANTY AND RETURN  
INFORMATION  
WARRANTY  
RETURNS  
Pelco will repair or replace, without charge, any merchandise proved  
defectiveinmaterialorworkmanshipforaperiodofoneyearafterthedate  
of shipment.  
In order to expedite parts returned to the factory for repair or credit, please  
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an  
authorization number (CA number if returned for credit, and RA number  
if returned for repair).  
Exceptions to this warranty are as noted below:  
All merchandise returned for credit may be subject to a 20% restocking  
and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the  
assigned CA or RA number and freight should be prepaid. Ship to the  
appropriate address below.  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and  
keyboard).  
Three years on Camclosure® and fixed camera models, except the  
CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2,  
and MC3651H-2X camera models, which have a five-year warranty.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto  
Rico, send goods to:  
Service Department  
Pelco  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and  
DF5/DF8 Series fixed dome products.  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto  
Rico and are instructed to return goods to the USA, you may do one of the  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, includ-  
ing when used in continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding  
wiper blades).  
following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Eighteen months on DX Series digital video recorders, NVR300  
Series network video recorders, and EnduraSeries distributed  
network-based video products.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
One year (except video heads) on video cassette recorders (VCRs).  
Video heads will be covered for a period of six months.  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods  
to:  
Six months on all pan and tilts, scanners or preset lenses used in  
continuousmotionapplications(thatis,presetscan,tourandautoscan  
modes).  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
Pelco will warrant all replacement parts and repairs for 90 days from the  
date of Pelco shipment. All goods requiring warranty repair shall be sent  
freight prepaid to Pelco, Clovis, California. Repairs made necessary by  
reason of misuse, alteration, normal wear, or accident are not covered  
under this warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or  
loss resulting from the specific use or application made of the Products.  
Pelco’s liability for any claim, whether based on breach of contract,  
negligence, infringement of any rights of any party or product liability,  
relating to the Products shall not exceed the price paid by the Dealer to  
Pelco for such Products. In no event will Pelco be liable for any special,  
incidental or consequential damages (including loss of use, loss of profit  
and claims of third parties) however caused, whether by the negligence  
of Pelco or otherwise.  
The above warranty provides the Dealer with specific legal rights. The  
Dealer may also have additional rights, which are subject to variation from  
state to state.  
Ifawarrantyrepairisrequired,theDealermustcontactPelcoat(800) 289-  
9100 or (559) 292-1981 to obtain a Repair Authorization number (RA),  
and provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice  
number  
®
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall  
under the warranty conditions stated above, please include a written  
explanation with the product when returned.  
Method of return shipment shall be the same or equal to the method by  
which the item was received by Pelco.  
Pelco  
300 West Pontiac Way, Clovis, CA 93612-5699  
(559) 292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827  
International customers call 1-559-292-1981 or  
FAX 1-559-348-1120  
(Product specifications subject to change  
without notice.)  
Pelco, the Pelco logo, Camclosure, Esprit,  
Genex, Legacy, and Spectra are registered  
trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
C917M  
© Copyright 1996, Pelco. All rights reserved.  
4
Pelco Manual C917M (5/96)  
 

Peerless Industries Washer Dryer ACC 550 User Manual
Pelco Home Security System C2404M A User Manual
Pentax Digital Camera Optio X User Manual
Philips Car Stereo System 9P5031C1 User Manual
Pioneer Automobile Accessories CNSD 110FM User Manual
Pioneer Car Video System AVIC N1 User Manual
Pioneer Portable Multimedia Player CDJ 2000 User Manual
Planar Car Video System m52L User Manual
Poulan Lawn Mower 187570 User Manual
PYLE Audio Portable Speaker PADH1079 User Manual