Philips Work Light Standard Finish Flange Options User Manual |
Calculite
Standard Finish & Flange Options
Standard Finish Options
Note: Not all finishes available for all trims.
CCL Comfort Clear™
CCD Comfort Clear™ Diffuse
WH White
CL Clear
The matte white finish produces
the brightest aperture when illumi-
nated but provides the smoothest
transition to most ceilings when
off. White is available only with a
white flange.
Clear is the most specular and
therefore most efficient finish
available. Clear reflectors deliver
maximum photometric performance
but can produce a mirror image of
the interior of the space.
Comfort Clear is a slightly diffuse
clear finish, which eliminates irides-
cence and reduces the mirror image
inherent with specular finishes.
Comfort Clear Diffuse is a semi-
specular finish that softens the
light at the source of the reflector.
The finish creates a subtle, even
luminance from the reflector cone.
BK Black
CCZ Champagne Bronze
GD Gold
MG
Black is a specular finish that pro-
vides the lowest aperture brightness
possible and significantly reduces
source identification in a ceiling.
Champagne Bronze is a semi-
specular finish that softens the
light at the source of the reflector
while providing a warmer reflector
appearance. Light output is slightly
warmer as well.
Gold is a specular finish that
Multigroove trims provide a seam-
less matte black aluminum baffling
that captures stray light for a very
low brightness aperture.
provides a pale tint of color for
slightly warming the light output.
Reflector appearance mixes well in
spaces with gold and brass finishes.
Flange Options
P Polished Flange
W White Painted Flange
5/8" wide integral flange polished and finished to match
the appearance of the interior of the reflector (available
option on most reflector types).
5/8" wide integral flange painted matte white. Standard
trim detail on all reflectors.
Care & Maintenance
If handling of reflectors with Alzak® finish is required, the use of clean white or plastic film gloves is recommended
to avoid fingerprints. Alzak® surfaces can be cleaned by the following methods: Wipe off with soft clean, dry
lint-free cloth; or wipe off with a soft cloth dampened in mild detergent solution, rinse, then wipe dry with lint-free
cloth or paper towel. Avoid gritty cleaning agents.
Note: Not all finishes are available for all trims. Refer to specification sheet for availability.
© 2008 Philips Group
Lightolier is a Philips group brand
|
Philips Car Video System CED228 User Manual
Philips Clock Radio XP AJ 3380 User Manual
Philips MP3 Docking Station AJ301DB 79 User Manual
Philips Portable Speaker SBA160 10 User Manual
Philips Switch 3121 235 20301 User Manual
Pioneer Car Speaker S 31 LR K User Manual
Pioneer DVD Player DVL V888 User Manual
Porter Cable Cordless Saw 643 User Manual
Proctor Silex Microwave Oven 87027 User Manual
ProForm Treadmill PFTL989081 User Manual