Pelco Camera Accessories CM1750S BK User Manual

I N S T A L L A T I O N  
CM1750/CM1750-BK/  
CM1750-PVM/CM1750S/  
CM1750S-BK/BS1750/  
TB1750 Camera Mount  
C218M-C (11/05)  
Specifications  
Pan Adjustment  
Tilt Adjustment  
Construction  
Finish  
360°  
90°  
Aluminum  
Gray polyester powder coat with black swivel assembly (except for the CM1750-BK, CM1750S-BK, and CM1750EXT-BK,  
which are all black)  
Locking Method  
Camera Mounting  
Maximum Load  
Dimensions  
Set screw secures swivel assembly  
1/4-20 threaded stud and nut  
7 lb (3.18 kg)  
See Figure 1  
Weight  
BS1750  
0.25 lb (0.11 kg)  
0.25 lb (0.11 kg)  
0.50 lb (0.22 kg)  
0.30 lb (0.14 kg)  
0.25 IB (0.11 KG)  
0.38 lb (0.17 kg)  
CM1750-PVM  
CM1750/-BK  
CM1750S/-BK  
CM1750EXT/-BK  
TB1750  
1/4-20 THREAD  
1.13 (2.87)  
0.40 (1.02)  
4.00  
(10.16)  
Ø 1.00 (2.54)  
5.47 (13.89)  
CM1750  
5.09 (12.93) TB1750  
2.93 (7.44) BS1750  
3.31 (8.41)  
CM1750S  
Ø 1.00 (2.54)  
1.00  
(2.54)  
CM1750EXT/CM1750EXT-BK  
4X Ø .265 (.673)  
ON A Ø 2.250 B.C.  
Ø 3.00 (7.62)  
1/4-20 PEM STUD  
3.61  
(9.17)  
2.03  
(5.16)  
1.50  
(3.81)  
1.00  
(2.54)  
1.10  
(2.79)  
1/4-20 STUD  
1/4-20 SCREW  
CM1750-PVM  
BS1750/TB1750  
CM1750/CM1750-BK/CM1750S/CM1750S-BK  
MOUNT FLANGE  
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;  
ALL OTHERS ARE INCHES.  
Figure 1. Dimension Drawing  
C218M-C (11/05)  
3
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment.  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or  
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following  
information:  
Exceptions to this warranty are as noted below:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
Three years on Camclosure® and fixed camera models, except the CC3701H-2,  
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,  
which have a five-year warranty.  
If there is a dispute regarding the warranty of a product which does not fall under the  
warranty conditions stated above, please include a written explanation with the product  
when returned.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series  
fixed dome products.  
Method of return shipment shall be the same or equal to the method by which the item was  
received by Pelco.  
RETURNS  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in  
continuous motion applications.  
In order to expedite parts returned to the factory for repair or credit, please call the factory at  
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned  
for credit, and RA number if returned for repair).  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays. The  
lamp and color wheel will be covered for a period of 90 days. The air filter is not covered  
under warranty.  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing  
charge.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and EnduraSeries distributed network-based video products.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA  
number and freight should be prepaid. Ship to the appropriate address below.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are  
instructed to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from  
the specific use or application made of the Products. Pelco’s liability for any claim, whether  
based on breach of contract, negligence, infringement of any rights of any party or product  
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for  
such Products. In no event will Pelco be liable for any special, incidental or consequential  
damages (including loss of use, loss of profit and claims of third parties) however caused,  
whether by the negligence of Pelco or otherwise.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
REVISION HISTORY  
Manual #  
C218M-A  
C218M-B  
C218M-C  
Date  
4/99  
Comments  
Revised to new format.  
Per ECO 04-9896, added two models in black; CM1750-BK and CM1750S-BK.  
Added the CM1750-PVM.  
6/04  
11/05  
Pelco, the Pelco logo, Camclosure, Genex, Legacy, Spectra, and Esprit are registered trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
DLP is a registered trademark of Texas Instruments, Inc.  
©Copyright 2005, Pelco. All rights reserved.  
Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com  
USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150  
International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120  

Remington 100089 01 User Manual
Polk Audio db521 User Manual
Pioneer AVH P3200BT User Manual
Philips SHB1400 User Manual
Panasonic DMCGF3KK User Manual
Kodak K625E User Manual
Kenwood TM D700A TM D700E User Manual
Kenwood LZ 702W User Manual
Kenwood Car Video System DDX3049 User Manual
JVC KD AHD69 User Manual